Chassis Control System Fault Nissan Qashqai [Explained]

Your dashboard displays a message indicating that your chassis control system is malfunctioning as you drive your Qashqai. The car is not driving properly as you panic and wonder whether you can continue to drive it. Why does it happen?

As well as offering tips on how to resolve this problem, this article discusses several possibilities for its cause. Continue reading.

In addition to chassis control system failure, there are other causes. A Nissan Qashqai that fails its chassis control system typically has trouble starting and stopping. Corroded terminals, loose battery connections, or a bad battery are all causes of this problem.

Chassis Control System Fault Nissan Qashqai

“Chassis Control System Fault” in Nissan Qashqai – What Does it Mean?

There is a problem with the chassis of the car when you receive the ‘Chassis control system fault’ message. Start/stop systems are usually to blame when this happens.

Starting and stopping the engine without using the battery is possible with the start/stop system.

After pressing the brake pedal, a signal is sent to the starter motor, which begins to initiate the procedure of starting the engine once it is instructed to do so by the engine control unit (ECU).

Your Nissan Qashqai will get a control system fault if this fails due to one of the causes listed below; now, let’s investigate the most common ones.

Symptoms of a Nissan Qashqai chassis control system fault include:

Symptoms of a Nissan Qashqai chassis control system fault

Failing Battery:

If your Qashqai has been driven for more than four years without a battery change, then it’s probably in need of one. Nissan Qashqai control system faults can result from this condition, among other things. There are many reasons for this error message, but I believe this is one of the most common.

Low Battery Voltage:

It’s likely that your Qashqai’s battery voltage is low if you start getting this error message while driving.

You might have a failing alternator, hasn’t driven the vehicle for a while, or the battery hasn’t been charged, which results in your vehicle not getting enough power from the battery. Control system faults on Nissan Qashqai models are caused by this problem most commonly.

Loose Battery Terminals:

There is also a possibility that the battery terminals are loose, which can cause this error message. Nissans may have problems starting or running if the connections to the battery aren’t secure. This can prevent your Nissan from getting enough power from the battery.

Having removed the battery recently and not properly reconnecting the terminals can lead to loose terminals or bad connections. The fix is simple, but you should not restart your Nissan until the terminals are secured.

Corroded battery terminals:

Last but not least, corroded battery terminals can cause this error message. Nissan’s battery terminals can become corroded, which can negatively affect your Qashqai’s electronics if they stop conducting electricity.

It’s usually battery acid spilled on the terminal that causes them to corrode, or it’s water.

If it has built up corrosion on your battery terminals, you would need to use a battery cleaning brush to remove it. This brush can be used for wet and dry batteries. Your Nissan battery should be reconnected once they have been cleaned and you can now attempt to start it.

Having a chassis control system failure with your Nissan Qashqai?

chassis control system failure with your Nissan Qashqai

Fortunately, this is a simple problem to solve. There is a high probability that 99% of the time, these occurrences are caused by issues with the battery, instead of problems with the system itself, and not by a problem with the computer.

I would recommend that you check your battery as the first thing you should do. There is a possibility that the battery may be old and no longer hold a charge, so ideally you should replace it.

A wire brush or sandpaper can be used to remove any build-up that has formed on the terminals of the battery if you would like to check for corrosion on them. Also, make sure you connect the battery terminals properly.

It would be best to take the vehicle to the nearest Nissan Dealer if you still get this message after following the steps above. Analyses.

A battery issue may not be the issue, so you will have to have it repaired if it cannot be determined that the battery is the problem.

Related Articles

Haval H6 Problems [Causes & Solution]

Mercedes E300 Hybrid Problems [Causes & Solution]

Mini Cooper Drivetrain Malfunction 2024 [Explained]

Bad O2 Sensor Symptoms [Causes & Symptoms]

Does the Qashqai have a chassis control system warning?

It doesn’t stop you from driving your car, this problem doesn’t stop you. However, if it is not addressed as soon as possible, then other problems can arise with your vehicle as a result of leaving this problem unattended.

Leave a Comment