What if you went shopping and now do not have enough space to store all the stuff you bought? In this way, you will not overload the passenger compartment with your extra items. The frunk of their Tesla Model 3 has not opened or closed properly several times, according to some owners.
Tesla Model 3 Frunk Won’t Open – Why?
Despite your best efforts, you can’t open the frunk. Misaligned hood latches, malfunctioning cables, rusted microswitches, and malfunctioning latches are some of the reasons for this problem.
Still confused? Let me explain each problem in more detail.
Note: Model X Falcon door opening problems have also been reported just like frunk issues.
1. Actuators with faults
Actuators convert signals into motions that are useful. Whenever you click the open button on your Tesla hood, it won’t open if either of the actuators is broken.
It raises the hood about an inch when the primary actuator unlocks it. If you don’t open the hood, the second actuator will stop it from opening.
2. Faulty Microswitches
The hood’s microswitch determines whether or not it’s open. The hood may appear open even when it’s not if the microswitch is broken.
3. Actuator cables rusted
The actuator cables become jammed when there is rust on them. A rusted cable may either cause the frunk to be stuck while opening or may cause no problem when closing the frunk.
4. Hood latch misplaced
Tesla hoods can also be unable to close or open due to a misplaced hood latch. Due to the effects of this, microswitches and actuators can be damaged.
5. Restrictions on drivers
In rare situations, the frunk can be opened from the screen with this issue. If the driver’s door unlock settings have been enabled, this may occur.
6. Sensor Problems
The Tesla Model S or X may also cause a stuck frunk if it cannot detect that the car is parked, although it is extremely rare.
All The Fixes For The Tesla Model 3 Frunk
If you want to open your frunk, you must park your car first!
You are now ready to move forward with the troubleshooting process since you know what may cause the issue. Here are some fixes that may help you if you have a stuck Tesla Model 3, X, or Y frunk:
1: Gap in frunk but won’t open
A small gap appears between the frunk and the frunk, but the door doesn’t fully open. Frustrated frunk latches cause this error. The following are your options:
- Pry bars made of rubber or plastic will do the trick.
- Apply upward pressure with the pry bar once it is under the gap.
- As well as the upper latch cover, remove the lower one. Up to this point, you can see springs and other parts.
- WD40 penetrating oil should be sprayed on the metal pieces after the bonnet has been opened.
- Spend around 30 seconds letting it rest.
- Check the working once again after closing the frunk.
2: During the command, the front bonnet does not open
If the command appears to work, but the frunk is not opening, is it because it is not working? There is a high probability that a spring is stuck in this case.
The solution to this problem is as follows:
- Leave your car.
- As you press the open button on your touchscreen, press upward pressure on the hood of your Tesla.
- Using a little downward pressure, press the latch region on the frunk.
- Once more touch the touchscreen’s open button before releasing the pressure.
3: Nothing happens when I try to open the frunk
There is a problem with the actuator in this scenario. This can be solved by:
- Open the lower latch and the frunk using a pry bar.
- Switch off the switch by disconnecting the 3-wire connector.
- With a 10mm socket wrench, remove the frunk air intake cover. In addition, remove the cover on the battery.
- Take the cable from the 12A battery and unplug it from the primary actuator.
- With a 10mm socket, remove the two bolts.
- Place the new actuator in the secondary actuator compartment after you remove the primary actuator compartment. Reapply the two screws to strengthen the connection.
- Attach the release cable again to the actuator. Both ends of the cable should be plugged into the latch and actuator.
- As soon as all elements have been removed, place them back in their respective places.
- Then, close the frunk and restart the Tesla once all the components are back in place.
- Opening the frunk will allow you to test the actuator system.
Note: For additional visual learning, please see the video below.
Related Articles
Tesla Radio Not Working [5 Main Reasons]
Tesla Glove Box Wont Open [Complete Explained]
Tesla Charging Error No Power – Model 3, Y & S
Tesla Side Camera Not Working [7 Main Causes]
Alternate Methods
1. Manually released:
To open the frunk of a Tesla Model 3, you can also use the manual release option. On the driver’s side of the car, there’s a small round button.
2. With Tesla’s App:
It is also possible to open the frunk using the Tesla app. Click the Frunk Open/Close button in the Tesla app and confirm it.
If you clicked ‘yes’, the frunk will open after you confirm.
3. Using a key fob:
- You’ll need your key fob.
- Double-click the button near the Tesla logo in the upper left corner.
- Let the frunk open.
4. Call Tesla Support
It’s time for you to seek professional help if you’ve tried everything and nothing works.
Conclusion
The Tesla frunk can be quite frustrating if it isn’t working properly. In spite of the fact that there are many reasons why this problem arises, there are generally the same solutions. If you’re having trouble with your Tesla’s frunk, you can always try the methods above.
